A cable modem is a peripheral device used to connect to the Internet. It operates over coax cable TV lines and provides high-speed Internet access. Since cable modems offer an always-on connection and fast data transfer rates, they are considered broadband devices.
Dial-up modems, which were popular in the early years of the Internet, offered speeds close to 56 Kbps over analog telephone lines. Eventually, DSL and cable modems replaced dial-up modems since they offered much faster speeds. Early cable modems provided download and upload speeds of 1 to 3 Mbps, 20 to 60 times faster than the fastest ...
802.11g is a Wi-Fi standard developed by the IEEE for transmitting data over a wireless network. It operates on a 2.4 GHz bandwidth and supports data transfer rates up to 54 Mbps. 802.11g is backward compatible with 802.11b hardware, but if there are any 802.11b-based computers on the network, the entire network will have to run at 11 Mbps (the max speed that 802.11b supports).
However, you can configure your 802.11g wireless router to only accept 802.11g devices, which will ensure ...
802.11b is one of several Wi-Fi standards developed by the Institute of Electrical and Electronics Engineers (IEEE). It was released in 1999 along with 802.11a as the first update to the initial 802.11 specification, published in 1997. Both 802.11a and 802.11b are wireless transmission standards for local area networks, but 802.11a uses a 5 GHz frequency, while 802.11b operates on a 2.4 GHz band.
The 802.11b Wi-Fi standard provides a wireless range of roughly 35 meters indoors and 140 meters outdoors. It supports transfer rates up to 11 Mbps, or 1.375 megabytes per second. ...
802.11a is an IEEE standard for transmitting data over a wireless network. It uses a 5 GHz frequency band and supports data transfer rates of 54 Mbps, or 6.75 megabytes per second.
The 802.11a standard was released in 1999, around the same time as 802.11b. While 802.11b only supported a data transfer rate of 11 Mbps, most routers and wireless cards at that time were manufactured using the 802.11b standard. Therefore, 802.11b remained more popular than 802.11a for several years. In 2003, the 802.11a standard was superseded by 802.11g, which uses the same 2.4 GHz band as ...
Wi-Fi is a wireless networking technology that allows computers and other devices to communicate over a wireless signal. It describes network components that are based on one of the 802.11 standards developed by the IEEE and adopted by the Wi-Fi Alliance. Examples of Wi-Fi standards, in chronological order, include:
Wi-Fi is the standard way computers connect to wireless networks. Nearly all modern computers have built-in Wi-Fi chips that allows users to find and connect to wireless routers. Most mobile devices, video game systems, and other standalone devices also support Wi-Fi, enabling ...
In computing terminology, the term "wired" is used to differentiate between wireless connections and those that involve cables. While wireless devices communicate over the air, a wired setup uses physical cables to transfer data between different devices and computer systems.
A wired network is a common type of wired configuration. Most wired networks use Ethernet cables to transfer data between connected PCs. In a small wired network, a single router may be used to connect all the computers. Larger networks often involve multiple routers or switches that connect to each other. One of ...
A network consists of multiple devices that communicate with one another. It can be as small as two computers or as large as billions of devices. While a traditional network is comprised of desktop computers, modern networks may include laptops, tablets, smartphones, televisions, gaming consoles, smart appliances, and other electronics.
Many types of networks exist, but they fall under two primary categories: LANs and WANs.
LAN (Local Area Network)
A local area network is limited to a specific area, such as a home, office, or campus. A home network may have a single router that ...
Stands for "Virtual Local Area Network," or "Virtual LAN." A VLAN is a custom network created from one or more existing LANs. It enables groups of devices from multiple networks (both wired and wireless) to be combined into a single logical network. The result is a virtual LAN that can be administered like a physical local area network.
In order to create a virtual LAN, the network equipment, such as routers and switches must support VLAN configuration. The hardware is typically configured using a software admin tool that allows the network administrator ...
Stands for "Digital Subscriber Line." DSL is a communications medium used to transfer digital signals over standard telephone lines. Along with cable Internet, DSL is one of the most popular ways ISPs provide broadband Internet access.
When you make a telephone call using a landline, the voice signal is transmitted using low frequencies from 0 Hz to 4 kHz. This range, called the "voiceband," only uses a small part of the frequency range supported by copper phone lines. Therefore, DSL makes use of the higher frequencies to transmit digital signals, in ...
Stands for "Local Area Network" and is pronounced "lan." A LAN is a network of connected devices that exist within a specific location. LANs may be found in homes, offices, educational institution, or other areas.
A LAN may be wired, wireless, or a combination of the two. A standard wired LAN uses Ethernet to connect devices together. Wireless LANs are typically created using a Wi-Fi signal. If a router supports both Ethernet and Wi-Fi connections, it can be used to create a LAN with both wired and wireless devices.
Types of LANs
Most residential ...